ER-214™

  • ER-214™

    Automatic system to support the manual washing steps of flexible endoscopes

Our production

ER-214
Automatic system to support the manual washing steps of flexible endoscopes

ER-214 is a compact system which works in combination with the pre-washing sink of instruments (it can be located upon the sink, or hung on the wall using a specific wall bracket); it supports operators during all stages.
The device allows the traceability and the automation of the classic manual washing of flexible endoscopes.

Thanks to this device, the operator does not need to wash the endoscopes manually. This usual procedures do not completely avoid risks of error which can cause carpal tunnel inflammations and osteoarticular diseases. ER-214 prevents this set of problems. This process is validated by Dr. Lionel Pineau in his prestigious laboratories, Biotech-Germande.

1
2
3
4
5
6
7
8
9
10
1

Bar code reading system for identifying tools, operators and washing cycle management

2

Color display

3

Reset-stop-start button

4

Auxiliary instrument connection (optional)

5

Instrument connection

6

Diluted solution aspiration

7

Leak test connection

8

Concentrated detergent aspiration

9

Detergent outlet connection

10

Pinter and usb

Main Characteristics
ER-214 helps the operator step by step during all the phases through graphic messages on the display. The device performs this operations automatically:
Leak test is performed during all the washing cycle in order to reduce risks of instrument infiltrations.
Automatic detergent dosage thanks to the diaphragm pump, it dosages the right quantity of detergent reducing risks of waste and over dosages damaging for the instrument.
Automatic flushing and rinsing of endoscope channels with no reusable product, this avoid the recycling of water used for the cleaning, preventing risks of contamination.
Organic residual sample it is possible to take a sample of water to quickly carry out organic residual tests.
Full traceability through paper report  or saving data to USB. Data transfer between Bluetooth and Pcs.
Practical and fast use through barcode (or manual controls). ER-214™ cleans the instrument in a fast and safe way automatically. The operator just need to clean scopes outside.
Killing protein inside the endoscope channels according with UNI EN ISO 15883-5, NF EN 12353:2013. The process was validated through tests carried out by certified laboratories in Italy and by Biotech-Germande (France), in order to remove microbial film.

Benefits obtained by reprocessing
Leak Test performed by the machine during the entire cycle automatically. It guarantees a positive continuous pressure inside the endoscopes avoiding infiltrations.
Detergent savings by the automatic adjustable dose. It prevents waste or overdose that could damage scopes.
Full Traceability through barcode reader that identifies the operator and the instrument. Consequently, together with the printings of the single stages of the process, it is possible to track all phases until the final result. Alternatively you can send data to pcs via Bluetooth.
Time savings allow the operator to perform other tasks inside the cleaning room. In the meantime the device executes the pre-washing of endoscopes automatically.
Lowering of biological risks especially Carpal Tunnel syndrome.
UNI EN ISO 15883-5:2006 and NF EN 12353:2013 certified

Technical data
Made of food-grade ABS and stainless Steel 316L.
Other components made of materials resistant to aggressive chemical detergents.
Outside dimensions (WxDxH) 470x300x250 mm
Weight 10 kg
Certification Class I, according with all.VI Dir. 93/42/EEC and EN 61010-1, EN 61010-2-040, EN 61326-1, EN ISO 14971


ER214-2
ER214-3
ER214-4

Product Enquiry

Data Sheets

Close
Customer support

Ask the expert